Shiny Bathtub Reglazing Miami

Preparing the Tub for Reglazing in 6 Steps

1

The old glaze is removed from the bathtub through sanding or the application of acids.

2

The tub is cleaned and all the grout and caulk is removed.

3

The surface of the bathtub is thoroughly cleaned until all the dust has been removed.

4

Our expert repairs visible chips and removes all signs of rust.

5

The tub is washed again to remove particles that may have been left behind.

6

The tub is wiped so that the reglazing procedure can start.

*Please let us know if your tub has been refinished in the past. If the tub cannot be sanded down, the glaze can be removed and the bathtub can be resurfaced from scratch for an additional fee.

Masking Everything in the Room

The tiles around the tub are masked to prevent them from getting stained by overspray.

All thesurrounding fixtures and vanities are covered with great care by our expert.

The doorways are sealed so that no dust can enter the room and no chemicals can get out of the room.

Reglazing a Tub in Miami, FL

First, the entire surface of the bathtub is sprayed with a high quality primer – twice. This ensures a perfect bond.

The tub is then sprayed with 2 or 3 layers of glaze (this is a 2-part epoxy, urethane-based solution).

If necessary, our expert will re-caulk your bathtub.

Reglazing a bathtub usually takes 2 to 3 hours. Add the surrounding tiles and the process takes 3 to 4 hours. Don’t use the fixtures for 24 hours.

Preparing the Tub for Reglazing in 6 Steps

1

The old glaze is removed from the bathtub through sanding or the application of acids.

2

The tub is cleaned and all the grout and caulk is removed.

3

The surface of the bathtub is thoroughly cleaned until all the dust has been removed.

4

Our expert repairs visible chips and removes all signs of rust.

5

The tub is washed again to remove particles that may have been left behind.

6

The tub is wiped so that the reglazing procedure can start.

Masking Everything in the Room

The tiles around the tub are masked to prevent them from getting stained by overspray.

All thesurrounding fixtures and vanities are covered with great care by our expert.

The doorways are sealed so that no dust can enter the room and no chemicals can get out of the room.

Reglazing a Tub in Miami, FL

First, the entire surface of the bathtub is sprayed with a high quality primer – twice. This ensures a perfect bond.

The tub is then sprayed with 2 or 3 layers of glaze (this is a 2-part epoxy, urethane-based solution).

If necessary, our expert will re-caulk your bathtub.

Warranty